The efifect of wave breaking on surface wave imaging by Synthetic Aperture Radar     

孙建  管长龙  史剑 《中国海洋湖沼学报》2006,(1)

The effect of ocean wave breaking as a non-Bragg mechanism on backscattering cross-section and modulation transfer functions (MTF) of radar was investigated based on Bragg resonance theory and parametric method. The result showed that the additional effect of wave breaking on backscattering cross-section is not more than 20% except for the small incident angle of VV polarized electromagnetic (e.m.) wave but is significant for HH polarized e.m. wave. Breaking waves lead to increase in the modulus of tilt modulation MTF and the larger the wind speed, the faster the increase. For large incident angle, the modulus of tilt modulation MTF with wave breaking decreases quickly with incident angle for HH polarization and approach to that without wave breaking for VV polarization. The hydrodynamic MTF increases 30%-60% when considering wave breaking and the increase is larger for HH polarization than for VV polarization.  相似文献   

地倾斜台站数字化、模拟观测数据频率特性研究   总被引：2，自引：2，他引：0  

李正媛  陈鹏  林穗平  陈志遥 《大地测量与地球动力学》2003,23(1):74-77

分析了四川、云南的部分地倾斜数字化观测与模拟观测资料的特性，从频率范围，周期10天以上的FFT谱特性，固体潮波振幅，相位特征值等方面，论述了地倾斜数字化资料较模拟记录资料的信息组成变化，并对资料的分析与应用进行了初步探讨。  相似文献   

Comparing the modelled and measured target-strength variability of walleye pollock, Theragra chalcogramma     

Hazen  Elliott L.; Horne  John K. 《ICES Journal of Marine Science》2004,61(3):363-377

  相似文献   

无人机载线阵摆扫CCD影像几何校正     

张艳  王涛  赵亮  刘颖  徐青  孙雷 《海洋测绘》2006,26(5):65-67,78

针对无人机载线阵CCD传感器摆扫成像的技术特点,利用GPS/INS组合导航系统提供的导航遥测数据,对无人机载的线阵摆扫CCD影像建立了严格的成像模型,并设计了详细的几何校正流程。实验结果证实采用文中的成像模型和几何校正流程,可获得正确、高精度地理编码的线阵摆扫CCD正射影像。  相似文献   

基于坐标归一化和奇异值分解的直接线性变换解法   总被引：2，自引：0，他引：2  

周拥军  寇新建 《测绘科学》2008,(Z1)

直接线性变换方法是数字摄影测量和计算机视觉领域最常用的解析处理方法之一,特别适用于未检校数码相机的三维测量,但直接线性参数间的相关性、物方控制的约束和设计矩阵元素数量级的较大差异,均可导致法矩阵严重病态,从而影响解的稳定性。本文借鉴改进的八点基本矩阵估计算法,采用基于坐标归一化和奇异值分解的解法,即首先将像点和物点坐标进行相似变换得到归一化坐标后组成法矩阵,其次利用矩阵奇异值分解方法代替常规的最小二乘方法,模拟和真实数据表明,此方法可以有效提高解算精度和稳定性。  相似文献   

From 2D TO 3D Through Modelling Based On A Single Image     

Diego  Gonzalez-Aguilera  Javier  Gomez-Lahoz 《The Photogrammetric Record》2008,23(122):208-227

Three-dimensional modelling from single images remains an interesting topic of investigation in the research community, even though range sensors are becoming a common alternative for the generation of 3D information. The interest in single-image-based modelling is motivated by a wide spectrum of applications such as cultural heritage, civil engineering, urban planning and even criminology. In this paper a complete new production flowline is presented for modelling based on a single image. The modelling process consists of a series of familiar steps in photogrammetry and computer vision: feature extraction, vanishing point computation, camera self-calibration, 3D reconstruction and dimensional analysis. In particular, the methodology developed for single-image-based modelling takes a scientific approach combining several proven techniques with robust estimators. Finally, in order to demonstrate its capabilities, the reported examples include several real situations applied in different contexts.  相似文献   

基于航线的数码航摄影像可视化查询     

吴文静  程如岩  吴晓明 《地理空间信息》2008,6(4):62-64

针对数码航空摄影测量的特点,利用Java语言的Java3D开发工具包生成模拟的可视化航飞路线模型．利用Java3D的事件监听处理功能实现对航线模型的缩放、平移。单击航线模型上的曝光点可以实现对相应数字航摄影像的浏览,可以任意浏览整个测区的每一张影像．模型为整个数码航摄影像的处理过程提供便捷、高效的影像查询和浏览。  相似文献   

非量测数码影像在航测成图中的应用     

郑福海  刘倩  王铁军 《测绘与空间地理信息》2008,31(5)

如何加速成图周期,快速、高效地生产各种地理信息产品是摄影测量应用研究的主要内容.本文介绍了非量测数码航摄影像在全数字摄影测量工作站上进行地理信息产品生产的技术方法和工作流程,研究了关键技术环节.  相似文献   

Possible creep-related tilt precursors obtained in the Central Apennines (Italy) and in the Southern Caucasus (Georgia)     

F. Bella  P. F. Biagi  M. Caputo  G. Della Monica  A. Ermini  P. V. Manjgaladze  V. Sgrigna  D. O. Zilpimiani 《Pure and Applied Geophysics》1995,144(2):277-300

Daily averaged tilt component data from two sites of the Central Apennines (Italy) and of the Southern Caucasus (Georgia), respectively, revealed intermediate-term tilts as possible precursors to earthquakes (M=3.0÷4.7) which occurred in the above-mentioned seismic areas within a distance of 50 km from the sites. A good temporal correlation as well as a fair spatial correspondence between these residual tilts (with amplitude and duration of some microradians and months, respectively) and main shocks were pointed out, by removing both secular trends and seasonal thermoelastic effects from the raw tilts. An attempt was made to justify the above-mentioned results, based on the assumption that the observed intermediate-term preseismic tilts are the manifestation of aseismic creep episodes of comparable duration in the fault materials of thrust faults close to the tilt sites. The mechanism refers to a strain field slowly propagating from the preparation focal area to the tilt site, through crustal blocks separated by weak transition zones. This propagation is thought to be the cause of the local aseismic fault slip recorded by the tiltmeters. Previously, both discrete structures and strain propagation effects were revealed in the Central Apennines and are thought also to exist in the Southern Caucasus. As in the past, the rheological properties of fault materials are revealed as viscoelastic ones. In fact, creep equations obtained by applying several viscoelastic models on our data, proved to fit quite well some of the observed tilt precursors, producing viscosity and rigidity values very similar to those reported in literature.Professor Petr Viktorovich Manjgaladze died during the writing of this paper  相似文献   

加固含水平软弱层高陡边坡预应力锚索倾角的取值范围     

宋书志孔纪名  杨宗佶刘正梁 《山地学报》2006,24(B10):217-221

用直线和曲线滑面两种模型，模拟预应力锚索加固含有水平软弱层的高陡边坡的潜在滑动面，通过对锚索加固的力学机理分析来阐述预应力在滑动面主滑方向上产生分力的原因。从锚索受力角度上对锚索倾角的取值范围进行探讨，结合实际造孔过程有不同程度的孔斜或弯曲以及获取较好的锚固灌浆效果，就仰角锚固和俯角锚固两种锚固条件分别得出锚索倾角的取值范围，并以此来判定锚索的预应力是否会在滑动面走向方向上产生不利于坡体稳定的下滑力。  相似文献